Products Archive By `Nesting working operations`
-
PCD helicoidal shank cutter Z2+2 cutting angle 25° PCD H4,5 mm – POWERCUT 5
FPD2040
PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20°, HDM (High density metal).
-
PCD helicoidal shank cutter for nesting Z2+2 HDM body – POWERCUT 8N
FPD2059
Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 steel body PCD H3,5 mm mainly negative – POWERCUT 4NA
FPD2058
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 PCD H3,5 mm mainly positive – POWERCUT 4P
FPD2042
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 hdm body PCD H3,5 mm, mainly negative – POWERCUT 4N
FPD2041
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 HDM body, PCD H3,5 mm, mainly negative – POWERCUT 6N
FPD2043
Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.